Fit For The Job 3" Budget Paint Scraper
- 3" (75mm) ideal for wallpaper and wider areas of wood and metal
Product details
Durable, hardwearing stainless steel blade scraper
FAQs
See all FAQsHow do I fill cracks and holes in walls?
Rake out any loose material, press filler in with a filling knife, and overfill slightly. Draw the blade across firmly to leave it nearly flush, then sand smooth once dry. The Soft Grip Flexible Filling Knife comes in three sizes, and the 4 pack Plastic Filling Blades give you a blade for every size of repair.
What's the difference between a scraper and a filling knife?
A scraper has a stiff blade for removing old paint, wallpaper and adhesive. A filling knife has a thinner, flexible blade for spreading and smoothing filler. The 4pc Scraper Set covers most stripping jobs, while the 3pc Plastic Scraper Set is gentler on delicate surfaces.
How do I remove paint from a window without scratching the glass?
Wet the glass, hold the blade at a low angle and push gently. The Window Scraper is made for exactly this job. For paint in mouldings and grooves on window frames, use the Combination Shavehook.
How do I get a neat sealant line around a bath or sink?
Apply an even bead of sealant, then smooth it in one continuous pass with a shaped profile tool. The 3 pc Caulking Tool Kit gives you a choice of profiles for a clean, professional-looking finish.
Do I really need to stir paint before using it?
Yes. Pigments settle over time, which can cause uneven colour and coverage. For tins of paint, use 12" Wooden Paint Stirrers. For larger quantities, plaster or screed, the 16" Drill Fit Paddle Mixer fits your drill and mixes quickly. Use a low speed to avoid splashing.
How do I make sure my wallpaper hangs straight?
Walls and corners are rarely truly vertical, so don't use them as your guide. Hang a plumb line about a roll's width from the corner, mark it in pencil, and line up your first drop against it. The 2" Steel Plumb Bob & Line makes this quick and accurate.
How do I get rid of air bubbles and lifted seams in wallpaper?
Smooth each drop from the centre outwards with a paperhanging brush, such as the 7" Paperhanging Brush. Then run the Seam Roller gently along the joins to press the edges flat.
What's the best way to trim wallpaper neatly?
Press the paper into the join at the ceiling or skirting, hold a straight edge against it and cut with a sharp blade. The 24" Decorator's Trimming Edge and 9mm Snap-Off Knife work well together; snap off a section whenever the blade dulls to avoid tearing the paper. The 10" Scissors are handy for cutting drops to length.
How do I keep paint off the carpet when painting skirting boards?
Hold a paint shield against the floor as you work along the skirting, wiping it clean regularly. The 10" Paint Shield protects carpets and floors and also helps you paint a straight edge.
Is there one tool that does a bit of everything?
The 13-in-1 Soft Grip Multi-Function Tool combines several decorating jobs in one tool, making it a handy addition to any toolbox. Pair it with the Soft Grip 5m Tape Measure for measuring up before you start.
